FOUNDATION

To be determined by the site manager and according to the goetechnical survey report of the plot conditions.

STRUCTURE

The support walls are built by concrete blocks of 40 x 20 x 20 cm by concrete mortar. Floors and ceilings are supported by the same and formed by prestressed joists and arched concrete.

WALLS

1. Exterior walls of 35 cm thickness built with concrete blocks of 40x20x20 cm thickness isolated against humidity by an exterior mortar layer , air chamber with thermal insulation and projected polystyrene of 4 cm thickness for acoustic insulation and to avoid joints, air bricks of 7 cm thickness and covered with a plaster layer by machine.

2. Partition walls, each unit of 40 cm thickness : in the central part cement bricks of 40x20x20 cm, and both sides of the wall, with thermal and acoustical insulating of projected polystyrene of 4 cm. thickness, and the exterior the same ,walls of ceramic bricks of 5 cm each side and revetment of plaster layer projected by machine.

3. INTERIOR WALLS:

Interior walls will be built with ceramic air bricks (7cm thick) and will be coated with spray-rendered gypsum plaster, with the exception of the bathrooms which will be tiled from floor to ceiling.

4. SLOPED ROOFS: The sloped roofs (with a pitch of 35%) will be erected on hollow bricks,

with a layer of cement mortar and asphalted roofing board. The eaves will receive a decorative terracotta brick finish.

5. NON-ACCESSIBLE FLAT ROOFS: Non-accessible flat roofs will be formed on the basis of breeze concrete, forming inclination of 3,5%, asphalted roofing board (4kg/m2),extruded polystyrene (5 cm) for thermic insulation protected by felt and on top a layer of gravel.

CARPENTRY

1. INTERIOR CARPENTRY WORK: Aluminium windows lacquered in steel-colour matt; windows which can be opened will be equipped with one tip-and-tilt wing; aluminium roller blinds. Double glazing with air chamber type CLIMALIT (4+6+4). In bathrooms opaque panes type CARGLASS. Front door: triple-bolt security door with inside armoured panel of white lacquered aluminium. Model GARDESA by Arguti.

2. INTERIOR CARPENTRY WORK: interior doors plain beech wood with rubber sealing. Chrome-plated steel door handles with an ornamental rosette.

Wardrobe doors will match interior doors in style and finishing. The inside of the wardrobes will be panelled and divided by a shelf into an upper compartment and a lower compartment equipped with a clothes bar.

3. KITCHEN: upper and lower kitchen cabinets with plain beech-wood fronts; granite worktop type GRIS PERLA (2cm thick); kitchens will be equipped with pull-out extractor hood and electrical appliances ( ceramic hob, electric oven, refridgerator, dish-washer; all electrical appliances will be well-known makes such as SIEMENS or comparable brands); stainless steel sink with one basin and drip-off surface; mix battery by GROHE.

FLOOR AND WALL TILES

1. INTERIOR FLOOR COVERING: beige, grade A, porcelain tiles (45cm x 45cm) with 0,5cm grouts and matching skirting tiles.

2. TERRACE FLOOR COVERING: terrace floors will be tiled with extruded gres tiles (30cm x 30cm) with 1cm wide grouts; matching drainage spouts and skirting. Colour: pale terracotta.

3. KITCHEN: kitchens will be tiled from floor to ceiling with white tiles with bevelled edges (25cm x 40cm).

4. BATHROOMS: will be tiled with ivory-coloured, imitation marble tiles and will feature a matching decorative border.

PLASTERWORK AND MOULDINGS

1. EXTERIOR PLASTERWORK: of damp-proofed mortar cement with a fine scraped finish, with two coats of impermeable paint.

2. INTERIOR PLASTERWORK: machine-sprayed gypsum plaster, smoothed by hand; PVC edge protectors in all corners. Ceilings plastered except those in baths and kitchen which will receive false ceilings with plain stucco panels; ceiling coving in all rooms.

PLUMBING AND SANITATION FACILITIES

1. PLUMBING: The general net for hot and cold water will be of electrolytic copper pipes, properly dimensioned and recovered by with plastic pipes, fitted into the walls and covered with gypsum. Electric boiler with a capacity of 150 L.

2.SANITATION FACILITIES : in the bathrooms and shower rooms, sanitary units from ROCA model DAMA . All mixer taps chromium-plated from GROHE.

ELECTRICAL INSTALLATIONS:

For protection the house has an earth wire consisting of an uncovered copper cable (diameter 35mm)forming a closed circuit. The electrical installations comply with the electro-technical regulations for low tension. The power supply is 9.9 KW, monophase, and 220V, comprising 6 individual circuits. Switches and outlets (make SIMON, series 82) will be distributed according to the execution plans drawn by the architect. The installation network furthermore includes a telecommunications circuit with a telephone and TV/ Radio outlet in the lounge as well as in the main bedroom. The in-house telephone net will be connected to the public network. As regards TV and radio connections, each house will be furnished with a pre-installation system leading to a space designated for an antenna on the roof of each house.

AIR CONDITIONING

The lounge and all bedrooms will be equipped with a pre-installation system for air-conditioning, designed for the installation of split devices. The pre-installation system comprises electrical outlets, drainage and copper pipes. The pipes will be laid up to

the space on the flat roofs marked out for the sitting of the central unit, thus ensuring that they are not visible from the outside.

PAINTWORK

All exterior walls will receive two coats of plastic paint with a uniform finish. The interior walls will also be painted with plastic paint (colour: white) and will be given a smooth finish. Plastic anti-humidity paint will be used for the exterior paintjob; colour according to project.

LANDSCAPING, FENCING AND COMMUNAL POOL

1. GARDENS: The gardens will be designed and laid out in the Mediterranean style, and will thus feature primarily plants native to the region, such as olive and palm trees. Choice of plants at the discretion of the developer. Grama-grass lawns will form the basis of the garden throughout the urbanisation. Each property will have a private garden fenced in with wire mesh and additionally with a cypress hedge. The landscaping will further include a Mediterranean-style communal garden zone and a communal pool. To ensure easy maintenance, an ultra-modern automatic watering system will be installed.

2. EXTERIOR FENCING: To the road 1,20m high plastered concrete walls will close off the urbanisation. Each property will dispose of a 3,00m wide metal sliding gate (galvanized iron, black) giving access to the private parking space. The interior fencing will consist of wire-mesh and, additionally, cypress hedges. For greater privacy, a gate will give access from each private garden to the pool area.

3. COMMUNAL POOL: The communal pool will be built in the style of a lake with a standard depth of 0,90m (minimum depth) to 1,80m (maximum depth). The communal pool will be surrounded by a terrace and the communal garden.

4. PARKING AREAS: Each property will have a private parking space made of reinforced concrete with a grooved, anti-slip surface.

5. MAIL BOXES: A centralized, communal mail-box unit will be provided.

NOTE: These building specifications are subject to possible changes made by the architect and/or the site manager to improve building and installation quality with the aim of achieving an optimum final result.